VL-8M Lathe
- Specifications
- Standard Accessories
Specification:
| ITEM | VL-8M |
||
|---|---|---|---|
Standard |
C axis |
||
| Capacity | Swing over bed (mm) | Ø560 | |
| Swing over saddle (mm) | Ø420 | ||
| Distance between center (mm) | 750 | ||
| Max. machining dia. (mm) | Ø320 | Ø300 | |
| Max. machining length (mm) | 570 | ||
| Slant angle of bed | 30° | ||
| Travels | X-axis (mm) | 190(160+30) | 190(150+40) |
| Z-axis (mm) | 610 | ||
| Main Spindle | Spindle speeds (rpm) | STD:6000 (A2-5);OPT: 4900(A2-6); | |
| Spindle nose | STD: A2-5; OPT:A2-6 | ||
| Spindle bore dia. (mm) | Ø62 | ||
| Front bearing inner dia. (mm) | STD:Ø80 OPT:Ø100 | ||
| Bar capacity (mm) | STD:Ø45; OPT: Ø52 | ||
| Chuck | Chuck diameter (inch) | STD: Ø6" ; OPT: Ø8" | |
| Turret | Turret Type | STD:Hydraulic;OPT:Servo | Live tooling |
| Stations | STD:8 OPT:10 | 12 | |
| Model | LS-160A | LS-160SP*12T | |
| Square tool shank (mm) | STD: 20x20 OPT:25x25 | ||
| Boring bar shank diameter (mm) | Ø40 | ||
| Indexing time (sec) (0~180) | 0.5 | ||
| Live-tooling | Spindle speeds (rpm) | 5000 | |
| Feedrates | Rapid traverse (M/min) | X:20, Z:20 | |
| Tailstock | Type | STD:manual OPT:programmable | |
| Quill diameter (mm) | Ø65 | ||
| Quill bore taper | MT-4 | ||
| Quill travel (mm) | 50 | ||
| Tailstock travel (mm) | 540 | ||
| Motors | Main spindle (kW) | STD: β8 7.5/11; OPT: β12, α8 | |
| Live-tool (kW) | α2/10000i | ||
| X/Z-axis servo motor (kW) | X:β8/3000 1.2 Z:β8/3000 1.2; OPT: β12 α8 | ||
| Hydraulic oil pump (kW) | 0.745 | ||
| Chip conveyor (kW) | 0.2 | ||
| Coolant pump (kW) | 0.96 | ||
| Accuracy | Positioning | ±0.004 | |
| Repeatability | ±0.003 | ||
| Power | Fanuc (KVA) | 15 | |
| Machine Size | Height (mm) | 1785 | |
| Floor space (L x W) (mm) | 2560X1750 | ||
| Packing (w/conveyor) (mm) | 4040x2280x2180 | ||
| Net weight (w/conveyor) (kgs) | 4170 | ||
| Gross weight (w/conveyor) (kgs) | 4500 | ||
Standard Accessories
- FANUC 0i-Mate TD Controller
- Spindle Speed：6000 rpm
- Spindle Motor：7.5 / 11 Kw
- 6" Hydraulic Chuck
- Hydraulic 8-Tool Turret
- 4 Wedge Type Tool Clamps (for OD Tools)
- 4 Boring Bar Holders
- Taper Sleeve (MT No. 1 & MT No.2 ) x O.D. 20
- Boring Bar Bushings (Ø8,10,12,16,20,25) x O.D. 20
- Semi-automatic Tailstock with MT No.4 Quill
- Coolant System
- Leveling Bolts and Pads
- Automatic Lubrication System
- Work Lamp
- End of Program Light
- Tool Kit
- One soft and one hard jaw
- Operation & Maintenance Manual
- Programming Manual
- Parts List
